Eterna PIR failed after 30 months.
It's switching a standalone 50W Eterna LED flood, both PIR and flood are tucked nice and dry under the eaves of our thatched.
At least, presume it's the PIR. The flood is flashing on/off continually when triggered and I can hear click click, it stops at the end of the On time.
Reading the PIR leaflet, capacity is 1000W incandescent, 300W fluorescent, nothing given for LED.
Looking at a Steinel PIR - not one I want to use = it gives 1100, 720, and 300W LED.
Quite a difference 1000/300 against 1100/720.
Do they just make these ratings up?
So, the Eterna PIR, I'd like to stick with it as it's two-way pointable and has the 110 degree angle I want, but do you reckon it should be OK for 50W of LED?
It's switching a standalone 50W Eterna LED flood, both PIR and flood are tucked nice and dry under the eaves of our thatched.
At least, presume it's the PIR. The flood is flashing on/off continually when triggered and I can hear click click, it stops at the end of the On time.
Reading the PIR leaflet, capacity is 1000W incandescent, 300W fluorescent, nothing given for LED.
Looking at a Steinel PIR - not one I want to use = it gives 1100, 720, and 300W LED.
Quite a difference 1000/300 against 1100/720.
Do they just make these ratings up?
So, the Eterna PIR, I'd like to stick with it as it's two-way pointable and has the 110 degree angle I want, but do you reckon it should be OK for 50W of LED?