- Joined
- 16 Dec 2018
- Messages
- 212
- Reaction score
- 2
- Country
Hoping for some advice here. I have two cupboards under the stairs. A bigger cupboard that houses a fuse board and a smaller shoe storage cupboard. Both are separated with MDF but I can run cables between the two.
The bigger cupboard houses a fuse board and already has a light and light switch inside.
I'd really like to get some light into the smaller shoe cupboard. I know this can be done by extending the circuit from the existing light to the new light fitting but I'd like to automate the light coming on and off by swapping out the light switch for a 'push to break switch' https://bit.ly/2Nkga9T or something similar. My question is, how would I wire this if I wanted to have two, one on each door? Any ideas, or would I be better off using a PIR and positioning it between both cupboards?
The bigger cupboard houses a fuse board and already has a light and light switch inside.
I'd really like to get some light into the smaller shoe cupboard. I know this can be done by extending the circuit from the existing light to the new light fitting but I'd like to automate the light coming on and off by swapping out the light switch for a 'push to break switch' https://bit.ly/2Nkga9T or something similar. My question is, how would I wire this if I wanted to have two, one on each door? Any ideas, or would I be better off using a PIR and positioning it between both cupboards?