Pyronix door sensor. Exit, final exit timer and detection doesn't work. Tried relearning.

Take the cover off , take the pcb out , post picture of backplate on the door and the pcb , front and back
 
Sponsored Links
Attached I hope this helps.

The blue light does come on and off as I open and close door . But it's the setting when I configure as final exit / or 10 - zone er, I don't get the timed exit countdown and the alarm goes off, saying tamper on front door
 

Attachments

  • 2CA6FD49-77D7-43E8-977F-0359331ADC2C.jpeg
    2CA6FD49-77D7-43E8-977F-0359331ADC2C.jpeg
    122.5 KB · Views: 40
  • 337C7F05-C3CF-44D7-B831-54A90EBAAC6D.jpeg
    337C7F05-C3CF-44D7-B831-54A90EBAAC6D.jpeg
    344.8 KB · Views: 39
  • 20F73480-1DE9-428E-8895-CAFB785DC2F1.jpeg
    20F73480-1DE9-428E-8895-CAFB785DC2F1.jpeg
    409.3 KB · Views: 39
  • 16731F61-27DE-404C-930C-1BC63D244DE3.jpeg
    16731F61-27DE-404C-930C-1BC63D244DE3.jpeg
    457.3 KB · Views: 38
Rear back tamper plate broken .
You need a new plastic case to solve your tamper fault.
You need to be very careful when fitting the screw as this has damaged the back plate.
 
Rear back tamper plate broken .
You need a new plastic case to solve your tamper fault.
You need to be very careful when fitting the screw as this has damaged the back plate.
Ah cos I had a new door fitted
It was moved. So it's the back plate completely which needs replacing ? That screws onto the wall.
 
Sponsored Links
You will probably need a complete new contact,as you may not be able to purchase a empty case.
 
ok thanks
Do
You know which model it is or anything similar cheaper I could use ? I got it as part of the original set . I've checked eBay some different models are available as door sensors
 
Thank you


In the meantime is it possible to sensor the alarm without the door sensor

I
Will set the door sensor to unused for now
But not sure how exit will work

I will try
 
Who took the sensor off ? this is why I asked for picture as I get this all the time with door fitters and it ends in a charge to the company fitting the door …
 
Who took the sensor off ? this is why I asked for picture as I get this all the time with door fitters and it ends in a charge to the company fitting the door …
Door installer. Yeh it's too late now as I have t really had need to use the alarm as been working from home etc irs been over a year
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top