The Kitchen, photos of progress

  • Thread starter Deleted member 294929
  • Start date
20240319_190840.jpg
20240319_190902.jpg
 
Sponsored Links
20240319_191345.jpg

● Bottom left is the kick heater as had no room space for a radiator
Couldn't be arsed with UFH
● Top left Samsung Ovens
They have Steam Air fry and about 28000 other things. But I think a poor design.

● Top right Glass made to my design and wickes frame & supports. These would look ok in you shed or garage.
 
Last edited by a moderator:
very nice, Im likin it (y)

and plenty of room to expand the coffee corner :giggle:
 
Sponsored Links
My kitchen is still not finished. Had a few problems.

This one being that the kitchen fella didn't leave enough room for the Dishwasher. It's a mm or 2 out. However it's coursed pain.

View attachment 335067
It catches the units left & right as it hinges open

After lots of adjustment my conclusion was to have plastic perspex made to fit the door exactly. Now there is no over hang and it opens perfect.

View attachment 335068View attachment 335069
I'm now waiting for a glass panel cut to size that will stick to the perspex, that will match my other appliances.
The kitchen fitter flucked up on his measurements. So I had to have a door custom made for the Dishwasher.
20240319_192444.jpg
 
Last edited by a moderator:
20240319_192555.jpg
20240319_192549.jpg
20240319_192646.jpg

Blinds from a place in Epping
20240319_193228.jpg

I do like the door blind.
 
Last edited by a moderator:
Why? We were looking at Samsungs 70/30 built in the other week. Seemed okay to us. Was between Samsung or Beko.
As cookers they are great. They have everything including Airfry and Steam.
But tge display does not light up and it's hard to see at night unless all other lights are blazing.

Neff are the best
 
Why? We were looking at Samsungs 70/30 built in the other week. Seemed okay to us. Was between Samsung or Beko.
Sorry thought you were talking cookers.

17108782085126377400625255871656.jpg


These little shelves are rubbish.
Lack of adjustment..
 
That’s one of the things Mrs Mottie liked about it!
If the shelve is in lower position then you have trouble getting the milk out. It's tight.

If it's in the higher position you can just get your fingers in to pull somthing out.

I'm telling you it's rubbish. Get a Beko
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top