Unvented cylinder - documentation

[Madrab]

Not good enough - if building control say it hasn't been notified then quite simply it hasn't been and the builders need to get it sorted, or all you can do is threaten to get it done yourself and then bill them for it.

 

[Taconite5]

Not good enough - if building control say it hasn't been notified then quite simply it hasn't been and the builders need to get it sorted, or all you can do is threaten to get it done yourself and then bill them for it.

Will do.

I just can't believe a house builder with all the NHBC and regulations they'd cock up on something like this

 

[Taconite5]

OK the install was done by a person who is G3 registered through the GSR. I've checked their records and it does say "unvented systems".

However they didn't do any of the commissioning paperwork nor notify LABC. And I still don't have a compliance certificate. They don't seem to be forthcoming about helping.

Next steps? Who do I report these idiots to?

 

[Taconite5]

Update -

Installer and housebuilder still ignoring me
LABC said it's not their problem it's down to the CPS they used (still haven't confirmed which CPS if any)
GSR won't help as they confirmed they aren't the CPS for this installer and it's not a gas safety issue
Trading standards can't help as my contract is with the builder not the installer

I'm getting lost now how I sort this

 

[denso13]

I'm getting lost now how I sort this

Get a quote from a different G3 person to do whatever it takes to get it registered. Tell the builder to sort it or you will issue a claim against them for the cost of the new G3 person. Then claim against them if the don't cough up.

 

[Taconite5]

Get a quote from a different G3 person to do whatever it takes to get it registered. Tell the builder to sort it or you will issue a claim against them for the cost of the new G3 person. Then claim against them if the don't cough up.

Cheers!

So much for a G3 like body like the GSR forcing them to do this! If there's no risk of getting caught no wonder companies don't do paperwork properly!

 

[Notadecor8ter]

I didnt realise you needed this for unvented.

I loved in to a place with unvented i think knstalled by the previous owner who was a gas engineer.

Could this cause aggro long term if going through a sale?

 

[denso13]

Could this cause aggro long term if going through a sale?

Not when it was done by a previous owner.

 

[Taconite5]

I didnt realise you needed this for unvented.

I loved in to a place with unvented i think knstalled by the previous owner who was a gas engineer.

Could this cause aggro long term if going through a sale?

I've never been asked to provide a G3 unvented cert which is why this caused all the confusion if I even needed one.

They only ever ask for the GSR when I sold my last two properties