Every washing machine and dishwasher "won't drain" I attend, the hose runs under the units and up to the spigot.
They clogg up with particles that build up over time and can eventually kill the pump.
How to best relocate this waste pipe?
- Thread starter budest
- Start date
Every washing machine and dishwasher "won't drain" I attend, the hose runs under the units and up to the spigot.
They clogg up with particles that build up over time and can eventually kill the pump.
Depends on situation but I try and install them so that it goes up in adjacent cupboard(s) and across at high level rather than snaking for 2-3m under the kickboards!
Makes sense. Thanks.
Is this what I need?
MCALPINE T23U MULTIFIT BLANKING PLUG WHITE 40MM (https://www.screwfix.com/p/mcalpine-t23u-multifit-blanking-plug-white-40mm/96079)
MCALPINE T23U MULTIFIT BLANKING PLUG WHITE 40MM (https://www.screwfix.com/p/mcalpine-t23u-multifit-blanking-plug-white-40mm/96079)
Last question, is there a solvent based alternative? My fear is that the compression nut may not have enough clearance between the pipe and the wall.
Yep or a rubber bung type for internal which will get you lower down.
Just chop a bit of the wall out.
- Joined
- 22 Jan 2007
- Messages
- 23,164
- Reaction score
- 3,178
- Country
Solvent Weld Access Plug
www.toolstation.com
The dishwasher won't be tight to the wall so you'll have a bit more space than the diagram.
Is it a push fit coupler that's on the pipe with the blanking plug in it?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
