Ceiling fan

[Pg21]

I’m in the process of changing my ceiling light to a ceiling fan with light .Upon removing the existing light fitting,I have 3 cables dangling down,2 cables have an earth,neutral and live but the other cable has 2 live and an earth.My new fitting only has a live and neutral connector,how do I wire up the new fitting?(only 1 switch in the bedroom)

 

[Wayners]

Do not mix the browns up.

One brown is coming from switch so on and off.

Other 3 browns are permanent live. Always on.

Actually written on fitting if you look.

Loop meaning going to another light/lights and back to fuse box

 

[ericmark]

Normally the light would be switched, and the fan would use a remote control, so would wire something like this.

Can't understand why only two wires, how do you work light and fan independently?

 

[jj4091]

Normally the light would be switched, and the fan would use a remote control, so would wire something like this.View attachment 417499
Can't understand why only two wires, how do you work light and fan independently?

Don't they normally have a pull switch or remote control for the fan