roofing
- Thread starter nurulk
- Start date
Sponsored Links
75mm minimum - but whether this spans your required width is unknown
A flat roof could add no height to an out building, it depends on the design. Or it adds the depth of the joists and thickness of the deck
A flat roof could add no height to an out building, it depends on the design. Or it adds the depth of the joists and thickness of the deck
Your questions do not make any sense.
Structural timber sizes are relevant to the distance they are spanning.
The bigger the span the greater the size of timber section required.
Once spans become unfeasibly large then you would start looking at steel, glu-lam, easi-joist etc.
Structural timber sizes are relevant to the distance they are spanning.
The bigger the span the greater the size of timber section required.
Once spans become unfeasibly large then you would start looking at steel, glu-lam, easi-joist etc.
Bah!
Beaten in seconds by the nimble fingers of Woodstock.
Beaten in seconds by the nimble fingers of Woodstock.
Sponsored Links
Hi, use the TRADA span table guidelines to keep building control happy.
Ha.. Good point. Only just joined so still finding the ropes.. Like dates of posts.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
