Search results

Hi I am in the process of moving house and the one we are in at the moment we are renting out, I am obviously obtaining an Electrical certificate but just to check . The house does have the old style fuse box with wire. To get the certificate do I need a modern consumer unit ? and if so what...

Hi. Via my local council self-assessment form I dont need planning permission but of course there will be building regs. The situation is my garden is 120ft x 30ft, I plan to build a man shed / summerhouse bigger than 30m2. I have tried to get the answer from the council with no joy so...

Hi I am moving in a house in the next few months and for some reason the upper sections of the old chimney have been removed but there lower part thats between the kitchen and dining room is still in place , we would like to have that removed to make a large kitchen . What would you expect a...

Hi I have a Heatline c24 boiler, about an hour ago the boiler blew on of the glass fuses on the board..I have replaced this, Turned the boiler back on and the red light flashing points to the airswitch.. I have a spare boiler and have changed over the swith.Two wire connectors and two tubes...

Hi I have a heatline c24 boiler, The water runs luke warm but pipe from boiler is really hot..The boiler states 60 on the little red lights..I have tried running the water slower which does make it a bit hotter but then the boiler thinks the demand for water is not needed and the boiler goes...

Hi I have a Heatline C24 boiler, Temp would rise into the red when heating on and lose all pressure through the night..Expansion vessel had gone, So recently fitted an external expansion vessel which solved the temp riseing problem but still seems to lose pressure over night. Guessing theres...

Hi My boiler losers pressure over a day even when the heating is running, I know that my valve in my expansion vessel is leaking.Guessing thats the cause..Its an Heatline c24 is it possible to change the whole valve or get a tool that removes the middle part and replace..Thanks for any advice.

Hi I have an Heatline C24 Boiler, A long time ago the pressure was raising from 1.5 to over 3 and then total pressure lost in the morning, Problem was the expansion vessel..I pumped it up and boilers been fine for nearly a year..Recently its started doing it again..This time though it appears...

Not really house electrics but need some help. I have two beer pumps for my homebrew and they have internal pumps to dispense the beer..The problem is that there are 4 wires..Two (orange and purple ) power the light to the beer font.The other two are the pump but when I connected them to the...

Hi Not to go on to much with full long winded version:- Problem 1: Radiators not getting hot all over the house Action Taken so far 1: Cleaned out all rads on the garden with hose till run clear and put back on ( quite a bit of black stuff as system had had fernox put though it but...

Hi I have a Heatline c24 boiler ( please dont laugh ) I have been trying to balance the radiators so I get even heat to all..Its not going too bad but still have some way to go...The boiler when it gets to heat will cool down to the 60 on the display,fired up then heat to 80 ( takes about 13...

Hi To All All of my rads have a thermostat knob on them, One upstairs I think has been done the wrong way round...On all but this rad when the central heating is on the pipe going to the rad via the thermo knob is very hot..the other side if luke warm..The one upstairs the pipe going in via...

Hi To All Yes I know these are crap boilers with lots of probs...I already know this,but with an old house with no central heating it was my cheapest quote for the full install...Anyway,My heatline boiler of recent has been not good,The hot water has been ok as long as you can get the tap to...

Hi My boiler blew fuses on the pcb due to the pin behind the diverter switch leaking into it.This happened on christmas morning and thanks to someone on here i dryed it out and got running again.Yesterday it blew again ( totally forgot as it was working to sort it ) . This time i dryed it out...

Hi To All and hope you had a merry christmas I have an heatline c24 boiler,woke up christmas morning and the boiler had blown all three fuses,The two on the pcb and the one in the plug. Got to maplin today and brought a pack of fuses,problem is it seems to keep blowing the fuses on the pcb...

Hi To All I have a heatline c24 boiler,The boiler was raiseing in pressure from 1.5 to 3.0 when heating on.I read on here about the expansion Vessel,On checking it had virtually no air in at all.So i released the pressure via the pressure release and used a pump to bring the pressure to 1...

Hi To all I am quite a newbie to electrics but get the basics and understand the saftey issues,Just really after some advice.I have brought from a local diy store some downlights for my loft.Now when i got some for my kitchen each set of three had there own transformer and they were fine no...

Hi to all,First things first this is my first post here :D Now on to my prob,at the moment i have power running from my house to my shed/garage,this leads to a plug socket,what i want to do is use this power supply to power some lights in my garden,i have just got myself an outside double...