Search results

  1. A

    OUTDOOR ELECTRIC

    Hi all Looking for clarification, my Brother has just moved house, in the garage he has 2 consumer units, one for the house and would appear one for external lights and power to the Garden, for the outdoor power there is 10mm armoured cable (approx. 35mtrs, all underground and inside a thick...
  2. A

    screed

    can you lay a screed directly on to the thermal sheets (ecotherm) i am in the process of laying the floor in my extension, its an L shaped floor lay out from front to back its 45 feet 10 feet and side to side 18 feet by 10 feet, the original garage floor form part of the new extension, the...
  3. A

    concrete question

    All i have just had a concrete floor layed, how long will i need to leave this before i can lay the Kingspan thermal sheets and the top screed, al
  4. A

    BATHROOM MIRROR WITH LED

    Guys i have just purchased a Bathroom mirror heated with led's and pir, do i take a spur off the socket ring or the lighting!!!!! the instruction don't tell me!!! pls help cheers al
  5. A

    soldering copper pipe

    Guys i have just run approx 80 meters of copper pipe (New extension) 2 bathrooms (both have a separate bath and walk in shower) downstairs WC and utility, so a fair few joints, i have obviously cleaned all the joints of excess Flux and wire wooled them, so they all look bright and new, bear...
  6. A

    wiring diagram required for zone 1 bathroom light & tran

    Guys apols if this as already been posted can anyone give me a wiring diagram of how to connect 5 zone 1 bathroom LV down lights (35wts Halogen bulbs) each with its own transformer, al
  7. A

    JUNCTION BOXES

    Guys apologies if this as been asked before, can a heavy duty 30amp junction box be used for 5amp requirement, al
  8. A

    ELECTRIC UNDERFLOOR HEATING CONNECTED TO THE FUSE BOARD

    Guys i am fitting ELECTRIC UNDERFLOOR HEATING in 2 bathrooms, rather than connecting to a fused spur am i ok to connect both bathrooms directly from the fuseboard as i have a spare fuse (new crabtree splitload consumer unit fitted in January), if so what AMP size RCB is required, al
  9. A

    Bathroom extractor connected to a SENSOR switch

    Guys need some help and advice, i am fitting one of these new Bathroom sensor switches to turn on the lights and Bathroom extractor, the diagram for the sensor shows as follows, live and neutral into a DOUBLE POLE ISOLATION switch and then live and Neutral into the bathroom switch...
  10. A

    spacing for 610x305x10mm limestone

    can anyone advise the correct spacing for 610x305/10mm limestone wall tiles, al
  11. A

    correct wall tile spacing

    Guys i have 610x305 10mm thick limestone tiles, what is the recomended tile spacing required, regards al
  12. A

    WORCESTER GREENSTAR HIGHFLOW 440

    Guys what are your thoughts on this Boiler, anyone had any bad experiances! would you buy or not! is there anything else on the market that would do the same job for a large 4 bedroom house with 2 bathroom and 15 radiators regards al
  13. A

    Supplying hot water to new extension

    Guys new some help and advice, i just over half way through a 10,000 Brick extension, in the extension part will be 2 bathrooms up stairs and below WC/cloakroom and utility, in the untility at the back of the house and on the back wall will be a new Boiler (not yet prchased), at the front of...
  14. A

    Whats the best thing to cut Limestaone

    I have 2 Bathrooms to tile (Floor & Walls) with Mocha Limestone, Any reconedation for tile cutters to do the job, Cheers Albag
  15. A

    HEAT SENSATIVE LIGHT SWITCH

    A neighbour had a heat sensitive light switch fitted in their bathroom, this gismo was fitted in the wall and then tiled over, so just putting your hand on the tile turns the light on and off, Has anyone ever fitted one of these! How reliable are they! Are they difficult to fit! Where would...
Back
Top