fan

Hi, please help! We live in a rented flat and had the boiler condemned just before christmas because the flu (sp?!) was not at the correct angle so was puddling in the ceiling.They stuck the new one smack bang in the middle of the living room on an outside wall and all was well... For the last...

Hello Sorry if this question is unrelated for this forum but I have a question regarding fan blades secured onto the motor shaft using lock washer … For a normal 10" air circulator fans the lock washer or any mechanism used to secure fan blade coupling onto the motor shaft are more simple than...

Hi guys A few months ago the boiler stopped working and it turned out to be a blown F1.6A fuse on the PCB. Replaced that and it carried on working fine for a few months. Last night however again it blew the fuse but now when i replace the fuse everything is ok until i call for hot water or the...

I have a secondhand white knight sensordry tumble dryer which has stopped working properly. It heats up and the drum spins but after a while the trip switch on the back pops out. It then carries on spinning but I think the heat stops. It seems quieter than normal and I am wondering if the fan...

I have an existing isolator that allows the fan to come on when the light is switched on. It needs to be replaced and have bought a new switch already but I've found that the labels on the back for the wires are slightly different. Can anyone help with which wires go where on this setup please...

Hi, just moved house and discovered the cooker hood makes a horrible noise when the fan is switched on. I've removed all the filters and grill over the fan. The fan spins although I have seen it stop and then continue. The noise on occasion will briefly stop. There seems to be a fair bit of...