Hi everyone.
I won't bore you with my tale of woe but due to a problem I have had to remove a kitchen ceiling light fitting (temporarily). It has 2 wires, connected with a block to the supply.
Now when I switch the lights on, one of the other lights doesn’t come on. There are 3 lights in a row, if the removed one is 3, 1 lights but 2 doesn’t. I’ve checked by swapping the bulbs between 2 & 3 but still the same. Could it be a continuity problem?
The setup is as it was when we bought the house so I don’t know what’s what or where above the plaster board ceiling.
I won't bore you with my tale of woe but due to a problem I have had to remove a kitchen ceiling light fitting (temporarily). It has 2 wires, connected with a block to the supply.
Now when I switch the lights on, one of the other lights doesn’t come on. There are 3 lights in a row, if the removed one is 3, 1 lights but 2 doesn’t. I’ve checked by swapping the bulbs between 2 & 3 but still the same. Could it be a continuity problem?
The setup is as it was when we bought the house so I don’t know what’s what or where above the plaster board ceiling.