- Joined
- 26 Nov 2007
- Messages
- 177
- Reaction score
- 0
- Country
People,
My electrician has advised I need to run a 10mm earth connection from the property's incoming water pipe under the kitchen sink to the consumer unit area (he will connect it, presumably at MET).
He was very specific as to where the earth clamp should be fitted on the incoming water pipe. I cannot recall as to whether it was:-
1. On the tap assembly itself
2. The water pipe prior to arriving at the tap (exterior side).
3. The water pipe, following the tap (interior side).
Can anyone please advise and also if fitted to a pipe, what the max distance from the tap is
Kind Regards
Paul
My electrician has advised I need to run a 10mm earth connection from the property's incoming water pipe under the kitchen sink to the consumer unit area (he will connect it, presumably at MET).
He was very specific as to where the earth clamp should be fitted on the incoming water pipe. I cannot recall as to whether it was:-
1. On the tap assembly itself
2. The water pipe prior to arriving at the tap (exterior side).
3. The water pipe, following the tap (interior side).
Can anyone please advise and also if fitted to a pipe, what the max distance from the tap is
Kind Regards
Paul