Hi, I need a 12v 20a switch to fit into/on/through a 16mm wood panel. It is not possible to make the panel any thinner.
Any suggestions appreciated.
Thanks
Mike
Any suggestions appreciated.
Thanks
Mike
12v x 20 amp switch required
- Thread starter Mike53
- Start date
Sponsored Links
Toggle, rocker or other type?
If it's a toggle required, the front face of the timber can be counterbored to accept the nut.....a rocker switch will grip in the rectangular hole required but may need a spot of adhesive to keep it tight.
Maybe there are other surface mounted types available?
John
If it's a toggle required, the front face of the timber can be counterbored to accept the nut.....a rocker switch will grip in the rectangular hole required but may need a spot of adhesive to keep it tight.
Maybe there are other surface mounted types available?
John
Will that one accept DC? I thought most AC switches weren't rated for DC due to the constant arc on breaking.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
