- Joined
- 20 Oct 2012
- Messages
- 10
- Reaction score
- 0
- Country
Hi,
I want to install a Tapo S220 smart lightswitch (2 gang, 1 way) but I am unsure if I can do it with my current lightswitch wiring.
The lights in question are wired through a Surewire pre-wired junction box, so each switch has its own live and switched live, to the corresponding light, whereas the Tapo switch, only has one live and 2 switched lives.
My question is, can I put both of the lives from my 2 switches into the one terminal in the smart switch, or will this trip the light circuit, or cause other issues?
Cheers.
(images attached)
I want to install a Tapo S220 smart lightswitch (2 gang, 1 way) but I am unsure if I can do it with my current lightswitch wiring.
The lights in question are wired through a Surewire pre-wired junction box, so each switch has its own live and switched live, to the corresponding light, whereas the Tapo switch, only has one live and 2 switched lives.
My question is, can I put both of the lives from my 2 switches into the one terminal in the smart switch, or will this trip the light circuit, or cause other issues?
Cheers.
(images attached)