• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Alternative to A142 mesh?

Joined
28 Oct 2009
Messages
158
Reaction score
9
Location
Aberdeen
Country
United Kingdom
Hi,

We've been given plans for a new porch 1.8 x 2m which specify a floor with a 100mm concrete slab with A142 mesh on an insulated foam base.

Local suppliers can only supply A142 mesh in 3.6 x 2m or bigger which would leave me with a whole lot that I don't need and would have problems disposing of. Is there an alternative (thicker slab or alternative material to the mesh).

Thanks

F
 
Loose bars 6mm at 200mm centres each way.. but you may find that more expensive than the mesh. Not sure how you would have problems disposing of the steel.. either resell the extra or double up the mesh in the footing
 
Local suppliers can only supply A142 mesh in 3.6 x 2m or bigger which would leave me with a whole lot that I don't need and would have problems disposing of.
Sell it on eBay?

Look on eBay for a smaller piece, or a supplier who will cut to size?

Use the leftovers to build a compost heap?

Given that you/your builder will have to have the ability to cut the mesh, cut it into pieces small enough to transport to the dump in the boot of your car?


Is there an alternative (thicker slab or alternative material to the mesh).
https://www.google.co.uk/search?q=fibre+reinforced+concrete+alternative+to+steel+mesh
 
probably cheaper to buy the mesh and a cheapy angle grinder than buying lengths of rebar...that will still need cutting!
 
What nonsense the plans specify - there's no need for mesh or rebar in such a small, domestic area.

Add fibres to the mix, FWIW, and leave it at that.

Historical slabs were poured for ever without mesh - though i admit commercial or heavy use areas benefit from mesh or re-bar.
 
Thanks folks,

I don't know why the plans specify mesh although I suspect that the architect may have taken some existing plans (for a much larger building) and "tweeked" them or just cut and pasted "appropriate" text.

Cheers

F
 
Porsche? Nah that's next door neighbour.... seriously tho we were getting drawings done for planning permission & building warrants and he "threw in the porch drawings for free"
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top