- Joined
- 21 May 2005
- Messages
- 1,294
- Reaction score
- 134
- Country
ChrisR said:Yes I know. If you'd read wot I rote.... mine reads to 0.01mbar , ( up to 19.99mbar, then 0.1mbar up from there.) Get yourself a decent one!
I might read that but it still wont be accurate enough to set the gas valve up our D and D department have looked into getting the field engineers one that would do the job and they were looking at over £1000 and for 200 engineers it was cheaper to say just change the gas valve
Has to be able to read pascals not mbars