Boiler - Fuel Line from Pump Output to Nozzle

[mackers8923]

My boiler gave up this evening of all nights and I found the problem with a clogged filter, however after putting it all back together again, I now have a leak in the fitting from the oil line leaving the pump to the nozzle.

It has gone and I need to replace it, problem is I cannot find this anywhere on the net! Anyone out there assist, please see pic... View media item 28694

 

[tamz]

You don't need to replace it. Just tighten it right or put some Stag or Rocol on the joint.

 

[casius66]

Unless he's stripped the brass thread

 

[Terrywookfit]

Unless he's stripped the brass thread

They are steel threads.

It is usually the female thread in the oil pump that strips.

I have never seen a nozzle holder thread stripped .

 

[moliver34]

If the thread is damaged then your need a new part...

gosh its cold!