D
durhamplumber
Why not have had boiler up higher and right to do away with snorkel,then filter underneath.Sorry.Already suggested
Last edited by a moderator:
Boiler Upgraded
- Thread starter Gibbies
- Start date
Take the PMK out at a true 45 degree then vertical. It will look a little better
https://www.cityplumbing.co.uk/Worc...=9c8da0224a573e82416b19a6c38bcc26&fo_s=gplauk
As for the inside it only needs 2 pieces of board joined in an L shape rested on top of the boiler and painted to match the walls and you won't see any of it. Putting the filter under the boiler would look far worse as it has to be low enough to get the lid off.
https://www.cityplumbing.co.uk/Worc...=9c8da0224a573e82416b19a6c38bcc26&fo_s=gplauk
As for the inside it only needs 2 pieces of board joined in an L shape rested on top of the boiler and painted to match the walls and you won't see any of it. Putting the filter under the boiler would look far worse as it has to be low enough to get the lid off.
The more I look at the more I am disappointed. If it is relocated to the front wall, raised above the tiles and the pipe work reconfigured it would become I neater job I think. However that would require the flue to be drilled again. How would the existing flue hole be covered externally?
Attachments
Last edited:
D
durhamplumber
Proper job,replace the bricks.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
