HI,
In the process of bricking up the internal wall for the cavity gap from old (75mm cavity) to new (100mm cavity extension), what's the best approach here? Step/stagger the bricks in straight whilst following either the 75mm or 100mm cavity or slightly angle the blocks so that they align with one another?
My build shall have a steel resting on the block work therefore needs to be strong, with padstone.
The drawings do not hold this detail I'm after.
Thanks
In the process of bricking up the internal wall for the cavity gap from old (75mm cavity) to new (100mm cavity extension), what's the best approach here? Step/stagger the bricks in straight whilst following either the 75mm or 100mm cavity or slightly angle the blocks so that they align with one another?
My build shall have a steel resting on the block work therefore needs to be strong, with padstone.
The drawings do not hold this detail I'm after.
Thanks