Last year I had to call out an engineer from Heat line under my warranty to repair my boiler because I had a leak from my Three Way Valve. This was all replaced and worked fine, now a year on I’m having the same problem. Also now when my thermostat calls for heat it lights the boiler for about a min then cuts out before reaching the set temp.
someone suggested that it could be due to having 15mm pipes coming straight off the Flow and return instead 22mm. Do you think this could be a factor? or do you think my boiler might be the wrong size for the house? I live in a 3 Bed mid-terrace with a basement. I have the following radiators in the house:-
Hallway - 1 x 900mm(w) x 900mm(h) Double
Lounge - 1 x 1900mm(w) x 400mm(h) Double (in bay window)
1 x 900mm(w) x 900mm(h) Double in the dining area of the lounge
Kitchen - 1 x 300mm(w) x 700mm(h) Single
Basement - 2 x 1000mm(w) x 400mm(h) Single
Bedroom 1 - 2 x 1000mm(w) x 400(h) Double
Bedroom 2 - 1 x 1000mm(w) x 400(h) Double
Bedroom 3 - 1 x 700mm(w) x 400mm(h) Single
bathroom - heated towel rail 400mm(w) x 1000(h)
All the pipe work through out the house is 15mm.
someone suggested that it could be due to having 15mm pipes coming straight off the Flow and return instead 22mm. Do you think this could be a factor? or do you think my boiler might be the wrong size for the house? I live in a 3 Bed mid-terrace with a basement. I have the following radiators in the house:-
Hallway - 1 x 900mm(w) x 900mm(h) Double
Lounge - 1 x 1900mm(w) x 400mm(h) Double (in bay window)
1 x 900mm(w) x 900mm(h) Double in the dining area of the lounge
Kitchen - 1 x 300mm(w) x 700mm(h) Single
Basement - 2 x 1000mm(w) x 400mm(h) Single
Bedroom 1 - 2 x 1000mm(w) x 400(h) Double
Bedroom 2 - 1 x 1000mm(w) x 400(h) Double
Bedroom 3 - 1 x 700mm(w) x 400mm(h) Single
bathroom - heated towel rail 400mm(w) x 1000(h)
All the pipe work through out the house is 15mm.