- Joined
- 19 Apr 2009
- Messages
- 20
- Reaction score
- 0
- Country
Hello from a newbie living in France.
Can you guys help me with the correct mix of concrete for casting in-situ lintels? I know than I need to place reinforcing rods 1 to 11/2 ins above the base of the casting mould.
Haven't figured out the pouring aperture yet although my SDS drill on hammer will help the vibrating necessary to remove trapped air etc.
Your advice/comments are most welcome
Can you guys help me with the correct mix of concrete for casting in-situ lintels? I know than I need to place reinforcing rods 1 to 11/2 ins above the base of the casting mould.
Haven't figured out the pouring aperture yet although my SDS drill on hammer will help the vibrating necessary to remove trapped air etc.
Your advice/comments are most welcome