Clean shutdown on Hikvision system

[Jupiter01]

Some of you will know that I've been experiencing a number of issues with my Hikvision system and its probably related to the spate of power outages we've had.
I've raised this with UK Power Networks and they've offered to take a look at the equipment. Worth a try I suppose...

In preparation for them collecting the NVR, I've exported the logs to show the frequency of "video loss" events since we have been having these outages and now wanted to shut down the system before I disconnect it.

I don't have a local monitor connected and use the web UI to manage the system. I can only see a reboot option on here.

Can you please advise. Thanks in advance

 

[secureiam]

You can unplug cameras and down power NVR and remove.

 

[Jupiter01]

By switching the plug off in the NVR?

 

[T1GERIII]

Power switch on the back of NVR then pull plug. How I’ve always done it and they’ve all come back on working fine