Corner wrong?

[billozz]

i think I've gone wrong in the corner but can't figure what I've done wrong can someone tell me please.

 

[billozz]

I think it might be the ones I've marked but not sure

 

[billozz]

If I have cocked up, have I got to remove tiles or can I rescue it?

 

[simplesteve]

You’re o.k. That left hand column just gets treated as a ‘ stand alone block’, and you’ve continued the front and sides of it to make the same ‘brick’.
It just looks odd with the two colours, but it’s right.

 

[billozz]

Thanks so much for the reply I really appreciate it, I want sure if the 2 tiles I marked should have continued adding the corner, can you suggest how I continue with the next lot of times please should I use full tiles on the next column or use half tiles anywhere

 

[Odds]

I'd use a tile cut to size under the edge of the cupboard, then full tiles in the sequence already established along the other wall, with an edging strip down the inner wall to match up the outer one on that column you've marked.

 

[billozz]

I'd use a tile cut to size under the edge of the cupboard, then full tiles in the sequence already established along the other wall, with an edging strip down the inner wall to match up the outer one on that column you've marked.

An edging step on the inner wall?

 

[Odds]

An edging step on the inner wall?

yes. It'll smooth out the join with the cut tiles opposite.

 

[billozz]

yes. It'll smooth out the join with the cut tiles opposite.

What about pattern on the next wall full time at the bottom then half then full etc?

 

[billozz]

You’re o.k. That left hand column just gets treated as a ‘ stand alone block’, and you’ve continued the front and sides of it to make the same ‘brick’.
It just looks odd with the two colours, but it’s right.

How do I continue with the brick bond pattern? Can I use a half time at the bottom then full then half etc?

 

[simplesteve]

It depends on how your tiles fit into the length of that untiled wall going left. It could be you start in the middle of that wall, ( which is normal) so that the two ends are the same size of tile.
So, we don’t know the size of that tile going into the corner, but it’s deffo red. Then the rest are full tiles. Then the same brick bond going up.
I would clean that wall up a bit more first, ( before you start tiling on it) you’re going to struggle to not get any “ lippage” on that wall.

 

[billozz]

It depends on how your tiles fit into the length of that untiled wall going left. It could be you start in the middle of that wall, ( which is normal) so that the two ends are the same size of tile.
So, we don’t know the size of that tile going into the corner, but it’s deffo red. Then the rest are full tiles. Then the same brick bond going up.
I would clean that wall up a bit more first, ( before you start tiling on it) you’re going to struggle to not get any “ lippage” on that wall.

Thanks again, What's lip page?