Cost of the installation for a roof slate extractor fan vent

Hi,

We have just had a bodge job by an electrician trying to vent an extractor fan through drop eaves which is almost impossible. We have told him to we will get a price for a slate roof vent as we were not happy with the fan almost venting inside the loft.

Is there anyone that could offer me some advice, recommendation and a ball park figure on the cost of one of these things plus installation.

Many thanks in advance.

Mandy

 

Who would have a clue unless they had seen the job! $100 quid if you supplied the vent maybe.

 

You will need......

Pitched multi slate.....................£35.

A length of black 110mm pipe...£15.

A length of flexi hose................£5.

Cradling or brackets.................£10.

Mushroom cowl and/or skirt......£10.

Other things to consider are spare tiles, angle grinder, a bit of roof batten, scaffold. uninterrupted access to the loft space would be good.

Someone competent may get the whole venting thing set up for you in say 3 hours. If your lucky £200. If you live in London in a three storey house and a gang come along then stick another nought on the end.

 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Please select a service and enter a location to continue...

Plumber / Gas Engineer Electrician Builder Decorator Builders' Merchant Plumbers' Merchant Tile Supplier Flooring Supplier
Start Search

Are you a trade or supplier? You can create your listing free at DIYnot Local