We have a Creda TSR storage heater in the living room and last winter it stopped working! I opened it up last month and found that the 'thermal link' which I think acts as a fuse had seperated/blown. Bought a new thermal link and fitted it last week, came downstairs the next morning hoping to feel some well needed warmth and it was still cold. When I opened it up the brand new one had blown also!! I wonder what is causing this? The heater is about 12 years old and has always ran fine until last winter.
Creda Storage Heater problem
- Thread starter Ralph552
- Start date
Sponsored Links
B
breezer
short cct?
Assuming you had *some* heat the next day,
The thermostat has gone squit. The thermal cutout therfore melts at it's pre-set temperature because the thermostat is no longer regulating the elements.
This is very common.
The thermostat has gone squit. The thermal cutout therfore melts at it's pre-set temperature because the thermostat is no longer regulating the elements.
This is very common.
Thanks for the replies, I'm going to order a new input thermo from Applied Energy, hopefully it might do the trick. I'll report back once i've fitted and tried it as it's nice to see these threads like this closed resolved.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
