No, the cable is not stiff enough to go in, and 10 of them would be a bit ugly
Cut wire help please
- Thread starter dybleah
- Start date
No, the cable is not stiff enough to go in, and 10 of them would be a bit ugly
Sponsored Links
These wire crimps are insulation displacement crimps. The bite through the insulation and make a permanent connection. Just push two wires into the two holes, squeeze the crimp head with pliers. They also have silicone gel that keeps moisture out.
The only down side is the holes are side by side. But you only have 10 wires so it shouldn't be too bulky.
The only down side is the holes are side by side. But you only have 10 wires so it shouldn't be too bulky.
I could have driven to London and repaired this cable fifty times over in the time you've been faffing about trying to avoid repairing it properly. 
Sponsored Links
I could have driven to London and repaired this cable fifty times over in the time you've been faffing about trying to avoid repairing it properly.
Fair comment, but how would you fix this cable?
Another downside is they do not work reliably on multi-stranded wire. Thy are designed to work on solid ( single strand ) wire.
I could have driven to London and repaired this cable fifty times over in the time you've been faffing about trying to avoid repairing it properly.
Fair comment, but how would you fix this cable?
2 mins with a soldering iron.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
