- Joined
- 12 May 2007
- Messages
- 292
- Reaction score
- 2
- Country
Doing up a flat, changing out the kitchen and will be into replacing the worktops this week. The flat is on 11th floor and realistically the only way to get up is in the lift. Can get 2.3m lengths in the lift, the longest run in the kitchen is 3.8m so 2 bits that will require joining in the middle. I have a circular saw with a chunky blade on it, what is best way to cut, have tried a hand saw before but seem to get some deflection as the saw goes through, also whats best way to join ?