Decking project - concrete problem

Joined
2 Apr 2020
Messages
40
Reaction score
4
Country
United Kingdom
Hi guys,

Hope everyone is well and safe.

I'm looking to put decking outside my conservatory and not sure whether I'll be attempting it or not yet but thought I'd clear the area ready.

I've cleared alot of concrete however come across this slither which runs partially next to the conservatory and side of the house. It has a top pour which was level with the pathway and a bottom part which is more blue/black in colour and alot harder. Is it okay to remove this totally or best to just take the top layer off?

As you can see from the picture I started to take the top layer off but thought I'd get some advise.

Any advise would be really appreciated. Thanks for the help
 

Attachments

  • 20200402_162714.jpg
    20200402_162714.jpg
    391.7 KB · Views: 362
Last edited:
Sponsored Links
I cant see that being a problem unless you damage the masonry of the house.

You will obviously need to make space for the decking and frame so it will need to come out anyway won’t it?
 
You be ok as long as like PP says you don't start hacking away at the brick work. You going for Timber or composite decking. ? Decking one of my next tasks and i come to the conclusion that i going to spend a little more and get composite decking which i am going to lay on the concrete joists you use for block and beam flooring.
 
I cant see that being a problem unless you damage the masonry of the house.

You will obviously need to make space for the decking and frame so it will need to come out anyway won’t it?

Thanks for the quick responses, much appreciated. Yes it would need to come out ideally, otherwise build the frame around it. I'm just wanting to make sure taking it out wouldnt cause damp or foundation issues. I've attached another picture.

Yes ideally I would like to finish it with a composite decking, I haven't confirmed a size yet so haven't calculated a potential cost yet :eek:
 

Attachments

  • 20200403_185830.jpg
    20200403_185830.jpg
    527.2 KB · Views: 283
Sponsored Links
Why can't you deck over/around it, rather than mess about removing it?
 
Why can't you deck over/around it, rather than mess about removing it?

Yes it seems like a strong, foundation type concrete. I'm just going to take the top off which is a different pour as I'm aiming for the decking to finish level with the concrete path.
 
A bit of an update...I've constructed the majority of the outer frame and have set the frame 10inch off the house currently - due to the sloping conservatory foundation.

As you can see from the pictures, I'll be able to get a 2x4 ledger board in until it reaches the end of the door and tie it into the existing frame.

However between the end of the door and the concrete path I'm working out how best to do it...my thoughts are:
  • Leave as existing and just 'fly' the decking boards over the top at this section
  • Attach a further 6x2 to the back of the existing frame to reduce the fly over to 8 inch in this section
Any thought on this would be great!

Thanks again
 

Attachments

  • 15909922849424579761096373328062.jpg
    15909922849424579761096373328062.jpg
    415.2 KB · Views: 268
  • 15909923394221916161424285359196.jpg
    15909923394221916161424285359196.jpg
    485.5 KB · Views: 262
  • 15909923717878259037357681767676.jpg
    15909923717878259037357681767676.jpg
    619.4 KB · Views: 272
You could make a nice step that curves around the door in a half moon shape running just under the doors but over the sill. Do sort of the same thing to cover the slope and put planters on it.
 
Thanks for all the input on this. Just to show how it turned out I've attached some pictures. I ended up building around the concrete slab and flying the deck over it (around 6 inch gap). Thanks again
 

Attachments

  • 20200613_163419.jpg
    20200613_163419.jpg
    619.8 KB · Views: 238
  • 20200724_162749.jpg
    20200724_162749.jpg
    537.6 KB · Views: 239
  • 20200719_085754.jpg
    20200719_085754.jpg
    548.3 KB · Views: 246
Last edited:

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top