I am about to install a built under double electric oven in my new kitchen and have a few questions that need answering.
1:-The manufacturer (neff) in their instruction manual says that i have to burn in the insulation by heating the oven up prior to installing the oven.What does this mean and why do you have to do it.
2:-Connection should be made using a H05VV-F mains connection cable.What is this is it normal 30amp cooker wire.
3:-A electrician who did some re-wiring work placed the cooker connection unit behind where the cooker is to go.He siad that's where he always puts them.Its going to be tight but the oven will just fit in.Is it normal to put them behind the cooker.If so if they are close to the cooker is it a fire risk or are the connection units able to withstand high temperatures.
1:-The manufacturer (neff) in their instruction manual says that i have to burn in the insulation by heating the oven up prior to installing the oven.What does this mean and why do you have to do it.
2:-Connection should be made using a H05VV-F mains connection cable.What is this is it normal 30amp cooker wire.
3:-A electrician who did some re-wiring work placed the cooker connection unit behind where the cooker is to go.He siad that's where he always puts them.Its going to be tight but the oven will just fit in.Is it normal to put them behind the cooker.If so if they are close to the cooker is it a fire risk or are the connection units able to withstand high temperatures.