Hi
I've notified building control of a full rewire at my house and am now doing kitchen wiring.
I have an induction hob rated at 7.2kW that due to the kitchen design is quite far from the isolator (2.3 meters). I'm thinking of joining the hob cable to 4mm t+e clipped direct using a wago 222 connector in a wago junction box as a maintenance free method (it'll be behind drawer units). I will then connect to the 45A isolator and then to a 32A type B MCB (with RCD). Is this acceptable?
Thanks in advance
I've notified building control of a full rewire at my house and am now doing kitchen wiring.
I have an induction hob rated at 7.2kW that due to the kitchen design is quite far from the isolator (2.3 meters). I'm thinking of joining the hob cable to 4mm t+e clipped direct using a wago 222 connector in a wago junction box as a maintenance free method (it'll be behind drawer units). I will then connect to the 45A isolator and then to a 32A type B MCB (with RCD). Is this acceptable?
Thanks in advance