Hi friends,
Hope you are all well.
I have a bit of a problem and would apprciate if someone could advise what the problem could be.
My Flavel Welcome gas heater is not working as it should which has settings 1-4. It runs okay on the first setting but as soon as I start to increase it to either 2, 3 or 4 it keeps turning off by itself.
Over the weekend I gave it a good clean out, vacuumed out the burner, there was also a lot of soot by the small metal plate next to the ignitor which was cleaned but had no luck.
Please advise.
Many Thanks
Iqi
Hope you are all well.
I have a bit of a problem and would apprciate if someone could advise what the problem could be.
My Flavel Welcome gas heater is not working as it should which has settings 1-4. It runs okay on the first setting but as soon as I start to increase it to either 2, 3 or 4 it keeps turning off by itself.
Over the weekend I gave it a good clean out, vacuumed out the burner, there was also a lot of soot by the small metal plate next to the ignitor which was cleaned but had no luck.
Please advise.
Many Thanks
Iqi