Gap around toilet bowl x3 times grout gap

[buckfast]

Hi guys

I've cut a little too much off my tiles so I am left with a big gap around the toilet bowl base. It is about x3 times the grout gap. Unfortunately I don't have enough tiles to recut new ones, would filling the gap with white silicone do the job?

Any ideas ?

Gap around toilet

• buckfast
• 14 Feb 2015
• 1

Thanks [/img]

 

[simplesteve]

Blimey !!
If you are confident that the toilet is fixed firmly to the floor and wont move, then I would wait until the floor is completely finished, then grout it, including around the gap ( flat, not raised ). Once the grout is dry I would then put a silicone bead over the top of it around the pan. Use a silicone tool, with no more than an 8mm bead. Then I would throw that contour gauge you have been using in the bin !! No- wait a minute - you need it to cut the tiles for the other side with the same gap !