Gas hob/Electronic Ignition connection query.

[fireman22]

lmao

 

[rizla01]

Thanks guys.

Depending on the cooker I will use either one of those suggestions.

Thanks for the help.

And I shall meke sure that the cooker has a 5A fuse and NOT a 3A fuse.

.
.
.
.
.
.
.
.

..........Only joking.

 

[fireman22]

i did a double take then Riz lol, all the best

 

[ban-all-sheds]

i`m sure Riz will fit the correct fuse when he puts a plug on the flex and plugs it into the new cooker control unit in the cupboard

What about the oven?

this is what you suggested in the first reply and i agreed with in the second reply

But then you started going on about this truly bizarre idea of putting a 2nd CCU under the worktop.

You're making it up as you go along, aren't you....

 

[fireman22]

i`m sure Riz will fit the correct fuse when he puts a plug on the flex and plugs it into the new cooker control unit in the cupboard

What about the oven?

this is what you suggested in the first reply and i agreed with in the second reply

But then you started going on about this truly bizarre idea of putting a 2nd CCU under the worktop.

1st point ban, Kev said he would fail it if the correct fuse wasnt on the hob, hence my reply was about the hob.
2nd point, Riz then went on to say he might want to put a larger oven in that wouldnt be able to be put on a plug, that is why i suggested putting a second CCU under the worktop so he could have independant control over the oven & hob.

ban either your not reading all the posts or you are just being silly

You're making it up as you go along, aren't you....