- Joined
- 28 Oct 2005
- Messages
- 31,282
- Reaction score
- 1,998
- Country
I'll start us off.
When you've got a circular/skill saw and want to make accurate cuts then get a big rafter square. Use the big edge to run your saw down and clamp the 'L' shape to the timber you are cutting. That way you get a straight edge that doesn't hit your knuckles.
When you've got a circular/skill saw and want to make accurate cuts then get a big rafter square. Use the big edge to run your saw down and clamp the 'L' shape to the timber you are cutting. That way you get a straight edge that doesn't hit your knuckles.