ANYBODY GOT IDEAS ON A FAULT WITH ABOVE, PILOT LIGHT LIGHTS BUT MAIN GAS JETS DO NOT, ALSO PILOT LIGHT CONTINUES TO SPARK.
GLOWORM BOILER ULTIMATE LPG
- Thread starter CHATTYX5
- Start date
Turn CAPS LOCK off 
If sparking is continuing then the pcb has not recognised the pilot is there, no flame rectification.
Check the size and position of the pilot, the electrode and the wires connecting the electrode to the pcb.
If sparking is continuing then the pcb has not recognised the pilot is there, no flame rectification.
Check the size and position of the pilot, the electrode and the wires connecting the electrode to the pcb.
Thaks Dave
Have checked connection to electrode and found wire is loose and came out will i need to buy new electrode and wire.
Rob
Have checked connection to electrode and found wire is loose and came out will i need to buy new electrode and wire.
Rob
What is actually wrong with it? We cannot see it so can not base opinion on your boiler.
If you mean the electrode has fallen out of its bracket I think from memory it is held in place by a clip. If it is broken then yes you need a new one.
Thanks for reply, electrode still in place with clip, however wire which enters from below can be pulled out, i presume this should not happen,
Rob
Rob
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
