grohe tap nightmare

[mane1034]

im not expert.

What I need to buy on top of my existing valve fitting to connect to grohe sink tap pipe.

Pls see pic.

will this work

https://www.screwfix.com/p/compress...YnfducaBB-nnTi_6mGcaArpzEALw_wcB&gclsrc=aw.ds

 

[muggles]

What's the problem? Won't it just screw straight onto the existing valve?

 

[mane1034]

Thanks for help.

Grohe pipes are small so they are not fitting on my valve.

I searched on forum seem I need an adopter but which adopter will fit on my existing valve?

 

[kidgreen61]

You need a 3/8"BSP adaptor

 

[mane1034]

any link pls - will it go top of existing valve?

 

[mane1034]

will this work on top my existing
https://www.amazon.co.uk/Compressio...CGP0XJHDX5M&psc=1&refRID=BR5863WSRCGP0XJHDX5M

 

[muggles]

https://www.screwfix.com/p/tesla-br...exible-tap-connectors-15mm-x-3-8-2-pack/6089R

 

[mane1034]

https://www.screwfix.com/p/tesla-br...exible-tap-connectors-15mm-x-3-8-2-pack/6089R

But will it fit on top of my existing valve?

Im not sure if it will?

 

[terryplumb]

You will need a nut and olive ,to connect the adaptor ,that muggles linked to, to your isolation valve.

 

[mane1034]

any link to nut and olive required

 

[muggles]

Buy one of these and nick the nuts and olives off the ends

https://www.screwfix.com/p/compression-equal-90-elbow-15mm/33526

 

[mane1034]

thank thanks thanks