- Joined
- 20 Dec 2014
- Messages
- 43
- Reaction score
- 0
- Country
Y plan wiring is here: http://www.flameport.com/electric/central_heating/heating_wiring_Y_plan.cs4
which needs a slight alteration for the Hive, as there is no separate room thermostat.
On my photos there is one showing the (messy) wiring in the airing cupboard (blue box).
The black lead (three from the right) is the mid-point valve wiring.
Am I correct in thinking I can wire the hive receiver into the opposite connectors to this lead (along with a live and neutral feed) and it will work?
If not is it a tough / expensive job for an electrician?
Should British Gas have not installed it like this initially?