Help needed for novice with Texecom Premier Elite 24

[ninjin]

I am connecting up a door switch to one of the extra zones on the keypad. Which contacts do I use? A or T, or one from both pairs?

 

[sparkymarka]

If your doing eol the outer of both t and a or you can 4 wire if you have the cores.

 

[ninjin]

Thanks for all the help. Going to power up the system for the first time this afternoon and try to set it up.

In the bell box, there is jumper for battery. As default it is open. Should I close it before I power up and commission the alarm or once its all working?

 

[ninjin]

If your doing eol the outer of both t and a or you can 4 wire if you have the cores.

I have all 4 cores but I will only be running a door contact on it with Shunt and EOL. In this case, which should I use?

 

[sparkymarka]

Outer

 

[ninjin]

thx

 

[ninjin]

Just an update, all powered up and defaults loaded. Surprised myself that all worked! no bad wiring!

However, I have a problem with the disarming.

I can either use my key tag or code to arm the alarm. But went I come back in, it wont take my code and will only disarm with the keytag.

Any ideas?

 

[secureiam]

use in setup users, user locked by, remove the C.

That way you can use a tag or fob on entry

 

[ninjin]

great! all sorted!

Now got to wait for the Comm cable and hopefully setting up will be easier.

Any idea if you can adjust the brightness of the display?

 

[ninjin]

sorted out the dimming.... very easy!

Is there a way to rename the zones? So for example instead of Zone 1, it reads front door?

 

[secureiam]

zone setup text