On the way home tonight, when switching between high and low beam headlights as oncoming traffic approached, my lights got stuck on high beams. (01 Seat Cordoba) The arm that functions the switch wouldn't click them back off, and the clicking just doesn't work anymore. Also had a burning smell. I suspect the high beam low beam switch is done. However, when I got home, and turned off the lights and the engine, the high beams stayed on and wouldn't switch off. I had to pull the high beam headlight fuses out of the fusebox so that they would turn off. Can anyone confirm if this is the switch, if it is, which switch I need to buy, and if it's a simple enough job to do? And if there is a better way to deal with the problem rather than removing the fuses in the meantime. Cheers.