Honeywell/ ADE G4 PIR issues - HELP !

Joined
10 Apr 2016
Messages
2
Reaction score
0
Country
United Kingdom
Hi All,

I have a Honeywell/ ADE G4 alarm system fitted. I recently attempted to replace 3 of 5 PIR's with pet tolerant units.

The first unit fitted and worked without any issues. When I fitted the second unit all the power to the PIR circuit seemed to have failed.

I have checked the 20mm fuses on the main board and all are fine.

When I set the alarm on the LED keypad all the zone indicators illluminate, the alarm appears to set itself but it will not trigger no matter how much I jump around like a fool.

I telephoned my install engineer and he gave me the engineer/ install code but declined to offer help regards fault finding (except for a hefty fee)

Does anyone of you clever peeps have any idea how I can resolve this?
 
Sponsored Links
Joined
20 Nov 2007
Messages
2,954
Reaction score
268
Country
United Kingdom
You have BLOWN a FUSE. I worked that out by reading your 4th sentence. "When I fitted the second unit all the power to the PIR circuit seemed to have failed"

Looking at a fuse is NOT the correct way to find out if it is blown or not.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Top