Hotpoint WF530 on/off, wash, rinse & mini load lights fl

[panjabi]

Hello,

I have a Hotpoint WF530 the on/off, wash, rinse & mini load lights have started flashing.

I've emptied the water, cleaned the filter, any ideas why it's still not working?

 

[rocks1]

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

So in this instance with the second light flashing the error code would be f04 light 2. pressure sw stuck on empty

 

[panjabi]

so with wash being light 1, rinse being light 3 and mini load being light 4 is my error f11 lights 1&3&4, pump/draining error ?

Am i reading this right?

If so any ideas on how to fix it?

 

[rocks1]

Something jamed in the pump stopping it emptying.

 

[panjabi]

If it's behind the front filter cover thn it's rotating freely. Any thing else I can do?

 

[rocks1]

does the pump run or make a noise ,check the two terminals on the rear of pump with a continuity tester.