How to accurately mark behind wet wall panel
- Thread starter iffy100
- Start date
Offer up panel to wall and level a line across to top and bottom of your socket, reduce measurement 5mm top and bottom to allow overlap of socket edge .
Measure across to socket from previous panel or corner of room to either side of socket ( reducing again by 5mm for overlap).
If your measuring skills are poor increase overlap to 10mm and adjust after testing fit .
(You can always make aperture larger to fit).
Pencil marks are easily wiped off.
Measure across to socket from previous panel or corner of room to either side of socket ( reducing again by 5mm for overlap).
If your measuring skills are poor increase overlap to 10mm and adjust after testing fit .
(You can always make aperture larger to fit).
Pencil marks are easily wiped off.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
