1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Ideal mini C28 HE

Discussion in 'Plumbing and Central Heating' started by Paul mcgreevy, 25 Aug 2016.

  1. Paul mcgreevy

    Paul mcgreevy

    Joined:
    25 Aug 2016
    Messages:
    45
    Thanks Received:
    13
    Location:
    Liverpool
    Country:
    United Kingdom
    Got a problem on this ideal mini, at first would only fire on H/W for about 10 seconds boiler lit then would shut down, at first I thought overheat stat via the fault finding guide, I then tried linking it out still no C/H nor would boiler fire in H/W mode, so I put wires back on the stat, I then spoke to tech help who said it's deffo the C/H thermistor preventing the boiler from lighting, iv changed the thermistor and still nothing! Seems to run through the sequence then locks out showing ignition fault I think it said! Is it possibly a faulty pcb ? It's the model with 1 pcb board. Possibly dodgy relay ? Hope somebody can help with this! Without giving smart arse comments!! Many thanks
     
  2. Steelmasons

    Steelmasons

    Joined:
    10 Oct 2011
    Messages:
    16,407
    Thanks Received:
    3,968
    Country:
    United Kingdom
    You go ahead and keep changing parts....
    A common fault on these boilers....usually won't require any parts at all.:ROFLMAO:
     
  3. Steelmasons

    Steelmasons

    Joined:
    10 Oct 2011
    Messages:
    16,407
    Thanks Received:
    3,968
    Country:
    United Kingdom
    So what was your reply when tech asked for your gas safe number?.:censored:
     
  4. Paul mcgreevy

    Paul mcgreevy

    Joined:
    25 Aug 2016
    Messages:
    45
    Thanks Received:
    13
    Location:
    Liverpool
    Country:
    United Kingdom
    What do you mean steelmasons?? I gave them my gas safe number of course....
     
  5. Paul mcgreevy

    Paul mcgreevy

    Joined:
    25 Aug 2016
    Messages:
    45
    Thanks Received:
    13
    Location:
    Liverpool
    Country:
    United Kingdom
    So any help or advice?? There's some decent folk on here that's why I joined this site, but also a lot of people who try and belittle people..... I'm interested to hear what you have to say steelmasons.... You want my gas safe registration ?? Lmfao
     
  6. Steelmasons

    Steelmasons

    Joined:
    10 Oct 2011
    Messages:
    16,407
    Thanks Received:
    3,968
    Country:
    United Kingdom
    Yea post it up....looks like we got another troll..(y)
     
  7. Steelmasons

    Steelmasons

    Joined:
    10 Oct 2011
    Messages:
    16,407
    Thanks Received:
    3,968
    Country:
    United Kingdom
    So your first post on this forum asks for no smart arse comments...:ROFLMAO::ROFLMAO:
     
  8. Paul mcgreevy

    Paul mcgreevy

    Joined:
    25 Aug 2016
    Messages:
    45
    Thanks Received:
    13
    Location:
    Liverpool
    Country:
    United Kingdom
    511658 I'm not a troll! Ha I understand you see a lot of people on here who are not gas safe engineers, but I'm genuine.
     
  9. Steelmasons

    Steelmasons

    Joined:
    10 Oct 2011
    Messages:
    16,407
    Thanks Received:
    3,968
    Country:
    United Kingdom
    Try joining the CC when quoting that number....good luck...:ROFLMAO::ROFLMAO:
     
    • Like Like x 1
  10. snes

    snes

    Joined:
    28 Nov 2004
    Messages:
    364
    Thanks Received:
    57
    Country:
    United Kingdom
    Oh dear, Steely, we've got another Mr Angry on here.....
     
  11. Paul mcgreevy

    Paul mcgreevy

    Joined:
    25 Aug 2016
    Messages:
    45
    Thanks Received:
    13
    Location:
    Liverpool
    Country:
    United Kingdom
    Not angry snes I post a thread asking for advice and just get witty comments, pointless really! Still failing to understand how he can't or won't supply usefull advice,
     
  12. ianmcd

    ianmcd

    Joined:
    15 Aug 2010
    Messages:
    11,317
    Thanks Received:
    3,203
    Location:
    Lanarkshire
    Country:
    United Kingdom
    Because you are on an open forum and site rules stop anyone from giving advice on here that is combustion/safety related , join the combustion chamber and you will get the answer you need, and I would remove the post on here with your gas safe number if I was you, in the CC only registered gas engineers can see and comment
     
    • Thanks Thanks x 1
  13. dreadnoughtheating

    dreadnoughtheating

    Joined:
    31 May 2009
    Messages:
    3,324
    Thanks Received:
    637
    Location:
    Norfolk
    Country:
    United Kingdom
    Am the only one here, well it is late on a Bank Holiday friday after all....) who entered that code into the GSR mainframe 'pooter and got "Business cannot be found"

    Please ensure you are entering their registration number which is a number of between 1-6 digits.

    If you have a 7 digit number this is their licence card number. To check this please use Check a Gas Engineer.

    Alternatively call us on 0800 408 5500 for further assistance.

    Edit Edit, just re-read steels post. so no I not the only one :censored::censored::censored:
     
  14. DIYnot Local

    DIYnot Local

    Joined:
    3 Sep 2019
    Country:
    United Kingdom

    If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

    Select the supplier or trade you require, enter your location to begin your search.


    Are you a trade or supplier? You can create your listing free at DIYnot Local

     
Loading...

Share This Page