Induction hob_Instalation

Joined
16 Jun 2018
Messages
1
Reaction score
0
Country
United Kingdom
Hi

I want to install a new induction hob to replace a gas one.

The house is new and the gas hob is connected to a unswitched FCU of 13A (under the bench for the lighter). On the other hand, the FCU is connect to a 3 gang control Switch (Hob, hob fan and cooker).

The Induction hob is a plug and play for a 13A socket: https://www.zanussi.co.uk/kitchen/cooking/hobs/induction-hob/zei6840fba/

Can I switch the FCU by a normal 13A socket?

Is better, cut the wire of the hob and connect to the FCU? Can the warranty by void if I cut the wire?


Thanks in advance
 
Links in this post may contain affiliate links for which DIYnot may be compensated.
Sponsored Links
Electrically it makes no difference - either change the FCU to a socket and plug in, or cut the plug off and wire into the FCU.

Warranty will not be affected by either option.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top