is the wall already tiled or going to be tiled ?
info needed regarding a thermostatic shower
- Thread starter sammybass
- Start date
Sponsored Links
quite a few different fixing kits about for bar mixers.
first you need to know if the stud wall has any noggins in the way or your
pipe isn't going to go through.
is it over a bath or shower cubicle ?
is the bath/cubicle fitted already or not ?
first you need to know if the stud wall has any noggins in the way or your
pipe isn't going to go through.
is it over a bath or shower cubicle ?
is the bath/cubicle fitted already or not ?
Sponsored Links
i'd probably more likely go for the bar mixer surport bracket secured onto a noggin.
come on moggridgeplumbing
don't let the side down with pushfits in the stud wall
Fair point Seco
- If it was me I would use copper all the way, channelling out the plasterboard. It's going to be tiled anyway so a lot easier in the long run.http://www.plumbworld.co.uk/bar-mixer-valve-fixing-kit-4067-16361
no need to work out thickness of wall tiling adhesive etc with this
no need to work out thickness of wall tiling adhesive etc with this
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
