- Joined
- 5 Nov 2010
- Messages
- 379
- Reaction score
- 3
- Country
Just want to be sure, are there any pitfalls when installing a bath tub up against existing wall tiles instead of the usual way of installing tiles just above the tub?
I need to raise the height of the tub compared with the old one because the previous installer didn't allow room for floor tiles to properly fit under the bath panel when installing the wall tiles. Obviously, this means the new tub will have go slightly higher than the bottom of the lowest wall tiles, unless I cut the tiles which might be more trouble than it's worth if the break.
Thanks very much.
I need to raise the height of the tub compared with the old one because the previous installer didn't allow room for floor tiles to properly fit under the bath panel when installing the wall tiles. Obviously, this means the new tub will have go slightly higher than the bottom of the lowest wall tiles, unless I cut the tiles which might be more trouble than it's worth if the break.
Thanks very much.