- Joined
- 17 Apr 2005
- Messages
- 17
- Reaction score
- 0
- Country
Hi all.
I wish to run four lights in two rooms in my out house (2 in each room).
I will be running them from the garage fuse box next to it. I plan to do it in a radial circuit with the first light point providing a feed to the second room as well as the switch for this room.
I wish to do it this way to avoid excessive cable from a loop.
sorry i cannot display a diagram but each point would be wired as below.
Cable 1.5 mm T&E max length 12 metres.
light point 1.
wire from fuse box.
feed to second room.
switch cable
feed to second light in room
light point 2
feed from first light only (fed from switch live at first point so they both work from one switch).
light point 3
feed from first room.
feed to second lighting point
switch cable
light point 4
Feed from switch 3
Hope this is sufficient for you.
+++++++++++++++
Sorry light point 4 should read;
feed from light point 3 not switch as written.
______________________
moderator
please note 10a
I wish to run four lights in two rooms in my out house (2 in each room).
I will be running them from the garage fuse box next to it. I plan to do it in a radial circuit with the first light point providing a feed to the second room as well as the switch for this room.
I wish to do it this way to avoid excessive cable from a loop.
sorry i cannot display a diagram but each point would be wired as below.
Cable 1.5 mm T&E max length 12 metres.
light point 1.
wire from fuse box.
feed to second room.
switch cable
feed to second light in room
light point 2
feed from first light only (fed from switch live at first point so they both work from one switch).
light point 3
feed from first room.
feed to second lighting point
switch cable
light point 4
Feed from switch 3
Hope this is sufficient for you.
+++++++++++++++
Sorry light point 4 should read;
feed from light point 3 not switch as written.
______________________
moderator
please note 10a