I'm currently renovating my house and the internal door casings look like they have seen way better days. Replacing them isn't an option and I the amount of scuffed edges and dents would mean it would take some serious TLC to get them in shape.
I was wondering if there would be any major concerns in cutting some 6mm MDF on the table saw and re lining them securing with nails and Evo Sticks Like Sh*t?
I'd lose 6mm either side which aint a big deal but after priming and a couple of coats of satin they should look spot on without the need to strip fill, sand, fill what i missed, sand again, etc. As most of the architrave is still to be fitted I can just fit the arch so it sits nicely on the lip of the MDF. Oh, I don't intend to line past the jambs so no impact on the door opening.
Interested to read peoples's thoughts on this idea.
Cheers
I was wondering if there would be any major concerns in cutting some 6mm MDF on the table saw and re lining them securing with nails and Evo Sticks Like Sh*t?
I'd lose 6mm either side which aint a big deal but after priming and a couple of coats of satin they should look spot on without the need to strip fill, sand, fill what i missed, sand again, etc. As most of the architrave is still to be fitted I can just fit the arch so it sits nicely on the lip of the MDF. Oh, I don't intend to line past the jambs so no impact on the door opening.
Interested to read peoples's thoughts on this idea.
Cheers