Hi, I have an LP722 programmable heating controller which is approx 15 years old. I have moved the box and now want to fit back on the wall. The instructions say it can nbe surface mounted when put flush on the wall but there's no provision for the wires as they come out of the back, am i missing something?
LP722
- Thread starter jtheobald
- Start date
cut the plaster away behind the mounting plate 
also, if you put the programmer onto the mounting plate prior to fitting it, you will see there is a space between the programmer and the plate underneath the connections strip. You can cut cable-sized notches out of the bottom of the enclosure (make sure they are a very close fit round the cables to prevent fingers or anything being poked in). Do not cut the top of any enclosure as you would have to seal it against dust ingress.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
